Home page

JYYLC105-1491(2000) Fracturing Truck

Summary: Product Model: JYYLC105-1491 type

Classification: Fracturing Truck

关键词：

Fracturing Truck

Keywords: JYYLC105-1491(2000) Fracturing Truck

Hotline：

+86-716-8020627

Inquiry

JYYLC105-1491(2000) Fracturing Truck

I. Product model and name
　　
Product Model: JYYLC105-1491 type
　　
　　　　　JY-Enterprise code (Hubei Jiaye)
　　
　　　　　YLC-indicates the vehicle for fracturing
　　
　　　　　105-indicates that the maximum working pressure of the vehicle is 105MPa
　　
　　　　　1491-indicates the maximum water power of 1491KW(2000HP)

　　
Ⅱ. the main technical performance parameters of the machine
　　
2.1 Main dimensions:
　　
Total length:＜12000mm
　　
Total height:＜4050mm
　　
Total width: 2500mm
　　
2.2 Total weight:
　　
Weight of the whole machine: 36000kg~38000kg
　　
2.3 Main components:
　　
Platform engine
　　
Chassis
　　
Hydraulic transmission
　
Drive shaft
　　
Horizontal piston pump
　　
Hydraulic system
　　
Lubrication system
　　
Pneumatic system
　　
Cooling system
　　
Operation control (remote control) system
　　
Piping system

　　
Ⅲ. the main configuration
　　
3.1.1 Automobile chassis:
　　
Chassis to meet the load distribution requirements, front and rear axles and left and right side of the actual load is less than the rated load of the front and rear axles. The whole vehicle has enough anti-seismic performance and off-road performance, and can adapt to the well site road and ordinary road driving in China's oil and gas fields.
　　
Model: Bei Ben chassis ND1314D47J78X4
　　
3.2. Platform engine:
　　
Model: Cummins K50-G8
　　
Engine power KW (hp): 1678 (2250) (1950r/min)
　　
3.3 Hydraulic transmission:
　　
Model: BY2000
　　
Maximum input power KW(hp): 1678(2250)
　　
Maximum speed(r/min): 2100.
　　
3.4 Installation of engine/transmission box
　　
The engine/transmission box and the chassis of the car are installed with vibration isolation, using rubber mats for vibration isolation. The engine/transmission box is connected as a single whole and mounted in three points, one flexible mounting point at the front and two flexible mounting points at the rear.
　　
3.5 Driveshaft.
　　
The transfer case and frac pump are connected by a standard driveshaft. The drive shaft is equipped with a removable shroud to allow the operator the flexibility to turn the drive shaft when servicing the hydraulic end of the pump.
　　
A viscous damping silicone oil shock absorber is installed between the driveshaft assembly and the frac pump input flange to protect the engine and transmission from the vibration of the frac pump.
　　
3.6 Fracturing Pump:
　　
The pump is manufactured in accordance with ISO 9001 quality standards.
　　
3.6.1 Power end
　　
3.6.1 Power end
　　
5ZB-1860L (JY-2500) horizontal five-cylinder plunger pump:
　　
Rated input power: 1860kw (2500HP)
　　
Maximum connecting rod load (static load): 192325LBS(87239kg)
　　
Stroke length: 8"
　　
Plunger diameter: 4",41/2",5"
　　
Gear ratio:6.353:1
　　
Maximum input power: 1678kW(2250HP)
　　
Stroke length: 8"
　　
The hydraulic end is mainly composed of pump head body, suction and discharge valve assembly, plunger, packing, vanes and vanes seat, etc. Suction air stabilizer is installed at the suction inlet.
　　
The plunger surface is sprayed with wear-resistant alloy powder, which has good wear resistance and corrosion resistance.
　　
The plunger seal is composed of V-shaped packing, packing pressure ring and packing seat ring etc. arrangement.
　　
Under the hydraulic end, a working platform is installed.
　　
Plunger pump performance parameters under various working conditions
　　
(Engine speed n=1900r/min)

Gearing

Transmission Ratio

Stroke

Displacement
L/min(gpm)

Plunger Diameter

Pressure
MPa(psi)

Plunger Diameter

4” 4 1/2” 5”

4 4 1/2” 5”

3.75

2.69

2.2

1.77

1.58

1.27

111

135

169

189

235

299

651(172) 822(217) 1016(268)

915(242) 1155(305) 1428(377)

1113(294) 1405(371) 1737(459)

1394(368) 1759(465) 2175(575)

1559(412) 1967(520) 2432(642)

1938(512) 2446(646) 3024(799)

2466(651) 3112(822) 3848(1017)

105(11690) 99.4(14417) 80.6(15229)

91(8412) 72(10443) 58(13198)

75(6962) 59(8557) 48(10878)

60(5511) 47(6817) 38(8702)

53(4931) 42(6092) 34(7687)

43(3916) 34(4931) 27(6237)

34(3046) 26(3771) 21(4931)

This parameter is for reference only

Our Strength

Hubei Jiaye provides all kinds of well fracturing equipment and oilfield special vehicles for the oil industry, and its products are sold to all major domestic oilfields and overseas markets. In the long-term cooperation with customers from Liaohe Oilfield, Jilin Oilfield, Jianghan Oilfield, Chuanqing Oilfield, Xinjiang Oilfield, Daqing Oilfield, Shengli Oilfield, Zhongyuan Oilfield, etc., we have been well received by customers due to our honest service and excellent product quality. The sales performance of Jingzhou Jiaye Company is also booming, and the total sales amount reached RMB 53 million in 2008 and will exceed RMB 60 million in 2009. In the coming new year, we have full confidence to go further with a hundred-foot pole.

Inquiry